Description
FEATURES
Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby
increasing reliability and Mean Time Between Failure.
Symmetrical throttle response in both forward and reverse directions ensures smooth, concise
acceleration and deceleration in both directions.
Minimal deadband areas at both zero and full throttle positions eliminate hesitation when beginning to
accelerate or decelerate.
Environmental protection of major components through an epoxy layer over the circuit board assures
operation in harsh environmental conditions.
Wig-wag type throttle returns the throttle to neutral for convenience and safety.
Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.
Easy to install.
SPECIFICATIONS
Operating voltage: 13 - 58 VDC
Throttle output range: 0 to 4.8 Volts
Maximum throttle output: 5.1 Volts
Minimum throttle output: 0 Volts
Forward/Reverse current: 1.5 amp max
Symmetrical throttle response in both directions
Maximum deadband at zero throttle: 10 degrees
Maximum deadband at full throttle: 10 degrees
Datasheet
Reviews
There are no reviews yet.